Submit Your Request

I will reply within 24 hours.

Blog

why is my robotic pool cleaner not moving?

Views: 20     Author: Site Editor     Publish Time: 2024-06-03      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

When you was using the pool cleaning robot,, only to find that your robotic pool cleaner is sitting still at the bottom, 

stubbornly refusing to move? You may wonder, "Did I do something wrong? Is it broken? How am I going to fix this?" 

This scenario is all too common for pool owners, and it can be incredibly frustrating, especially when you're counting 

on that nifty gadget to keep your pool clean and inviting. Let’s dive into the possible reasons why your robotic pool 

cleaner might not be moving and how you can troubleshoot these issues to get it back in action.



why is my robotic pool cleaner not moving?



Several factors could be at play when your robotic pool cleaner is not moving. First, check the power supply. Ensure 

that it’s plugged in correctly and that the outlet is functioning. Sometimes, a simple reset of the power source can solve 

the problem. Next, inspect the cleaner’s cord for any visible damage or tangles. A damaged or tangled cord can prevent 

the cleaner from moving properly. Additionally, debris caught in the cleaner’s brushes or wheels can impede its movement. 

Clean the brushes and wheels thoroughly to remove any obstructions.


Another common issue is the pool cleaner's filter. If the filter is clogged, it can restrict water flow and prevent the cleaner from 

operating. Make sure to clean the filter regularly according to the manufacturer’s instructions. Lastly, check the cleaner’s 

software. Many robotic pool cleaners have a self-diagnostic feature that can identify specific problems. Refer to your user manual 

for guidance on how to run diagnostics and interpret the results.


What could cause the power supply to fail?

There are a few reasons the power supply might not be working. It could be due to a blown fuse, a tripped circuit breaker, or a 

faulty power outlet. First, check if other devices work when plugged into the same outlet. If not, try resetting the circuit breaker 

or replacing the fuse. If the outlet is fine, the issue might lie within the pool cleaner’s power supply unit itself. In such cases, 

contacting the manufacturer for a replacement or repair might be necessary.


why is my robotic pool cleaner not moving


How can I check for cord damage?

Inspect the entire length of the cord for any cuts, frays, or exposed wires. If you find any damage, it’s crucial 

to repair or replace the cord to prevent any electrical hazards. Sometimes, the cord might get tangled, causing 

the cleaner to stop moving. Ensure the cord is fully extended and not twisted. Some newer models have a swivel 

feature that prevents tangling, but older models might require manual untangling.


How do I clean the brushes and wheels?

Turn off and unplug the cleaner before performing any maintenance. Remove the cleaner from the pool and place 

it on a flat surface. Inspect the brushes and wheels for any debris or algae build-up. Use a soft brush or cloth to 

clean the brushes and wheels gently. Make sure to check the intake openings for any blockages. Keeping these parts 

clean will ensure smooth operation and prolong the life of your cleaner.


Why is it important to clean the filter regularly?

A clean filter is essential for maintaining the efficiency of your robotic pool cleaner. A clogged filter restricts water flow, 

which can cause the cleaner to malfunction. To clean the filter, remove it from the cleaner and rinse it thoroughly with a 

garden hose. For a deeper clean, soak the filter in a mild detergent solution and rinse again. Always let the filter dry 

completely before reinstalling it. Regular filter maintenance will not only keep your cleaner running smoothly but also 

improve the overall cleanliness of your pool.


Conclusion

In summary, several factors can cause your robotic pool cleaner to stop moving. By checking the power supply, 

inspecting the cord, cleaning the brushes and wheels, and maintaining the filter, you can troubleshoot most common 

issues. Regular maintenance and prompt attention to any problems will ensure that your pool cleaner remains in good 

working condition, keeping your pool clean and inviting. Remember, if you’re unable to resolve the issue yourself, 

don’t hesitate to contact the manufacturer or a professional for assistance. Maintaining your pool cleaner properly will 

save you time, effort, and money in the long run, ensuring you can enjoy a sparkling clean pool whenever you like.


That's it! This blog post should help you understand why your robotic pool cleaner might not be moving and how to fix it. 

Proper maintenance and prompt troubleshooting can keep your cleaner in top shape, enhancing your pool experience.


Share:

PRODUTS

WHY LINCINCO

QUICK LINKS

CONTACT INFO

  +86-137-98700447 (Andy Li)
  sales@cleverobot.com
  +86-137 9870 0447
  No.8 Yuanmei Road, Nancheng District,Dongguan,Guangdong ,China.523000
Copyright © 2012-2023 Dongguan Lingxin Intelligent Technology Co., Ltd.